10/31/2007 Earthmen Productions ©2000-2007
"PIC-BASED R/C Projects
Aiptek Electronic R/C Shutter Switch ! "AipAxe"
- User-programmable trigger point/direction - Small footprint, fits into most digital cameras - With Integrated "Model-Finder" Alarm
Parts
Building
Testing & Operation
Notes
- Supports 8 channels (multiple LEDs/channel) - Maximum of 100 events per sequence - Programmable Pattern/Rate using PC Program! - Programmable Servo control "zones" for channels - 800ma per channel ! (i.e. transistor outputs)
Discontinued
- Supports 4 channels (multiple LEDs/channel) - Maximum of 50 events per sequence - Programmable Pattern/Rate using PC Program! - Programmable Servo control "zones" for channels - 800ma per channel ! (i.e. transistor outputs)
- Supports 3 channels (multiple LEDs/channel) - Maximum of 50 events per sequence - Programmable Pattern/Rate using PC Program! - Programmable Servo control "zones" for channels - 800ma per channel ! (i.e. transistor outputs) - Programmable LiPo Cutoff/Warning Voltage (3s-5s) - Flashes All LEDs fast as a visual warning
- Servo pulse analyzer/discriminator - Employs unique "Glitch" algorithm - With Integrated "Model-Finder" Alarm
- Simple Servo (pulse) Reverser - With Integrated "Model-Finder" Alarm
- User-programmable Fail-Safe position - With Integrated "Model-Finder" Alarm
- Tiny PIC-based Servo speed interface - Variable speed via potentiometer (Designed and coded by Kevin Goom)
- In-Flight Data Logger/Analyzer - RPM, Battery, Temp, Glitches, & Altitude - With Integrated "Model-Finder" Alarm
- Simple and small "Model-Finder" Alarm - Loud Piezo alarm w/ settable "Sounds" - Integrated Beacon Flasher for nighttime
- 2 Axis Panning System (2 servos) - Stick movement changes servo velocity/speed - With Integrated "Model-Finder" Alarm
(See Video)
- Cheap but accurate Tachometer - Uses magnet(s) and Hall-Effect sensor - Read RPM on LCD display or Laptop
- Unique Glow Fuel Tank Level Indicator - Uses "capacitive" plates to sense level - Fuel Level indicated on 5 LEDs - Interfaces to existing fuel pumps (auto-stops pump when tank is full)
- Uses a cheap, modified GWS receiver - Integrated Frequency Synthesized Tuner - LCD Display and Jog Dial/Buttons
- Simple LED Voltage Monitor - Auto Cell Detect (3s, 4s or 5s LiPo Packs) - 2 LED Output (1-green, 1-red) & Peizo Alarm
- Dual RPM analyzers - Controls two servos (1 ea. engine) - Synchronizes two Engines using RPM feedback - Lowers throttle to idle when one motor cuts out
- Programmable via PC - Gets power from R/C receiver - Records Voltage and Current drain real-time - Records 500 samples during flight for PC analysis
Note: All pictures that follow are "clickable". Clicking on them will show you an enlargement!
This site is a member of WebRing. To browse visit Here.
Home | DIYRC STORE | About DIYRC.COM | What's New? | R/C Switches | Servo Projects | Tx/Rx Projects | LED Flashers | Battery Projects | PCB Projects | Wireless Video | PIC Projects | Other R/C Projects | SOFTWARE | Favorite Links | Forums... | Photo & Videos | WEBCAM LIVE | Contact Us
This site was last updated 10/31/07